SLEC Aero Model Supplies and Materials
  •  
  • View Cart
  • Checkout
  • Items:, Value:
  •  

Product Sections


Main Pages


Best Sellers

Modelling "T" Pins

Modelling

£2.35

A strong modelling pin at 30mm Long a must for any modelling. 100 per pack.
find out more

Balsa Sheet 3.2 x 102 x 915mm (1/8 x 4 x 36")

Balsa Sheet 1.6 X 102 X 915mm (1/16 x 4 x 36")

Crafty Cutter

Crafty Cutter

£1.68

Crafty Cutter - When covering with film this tool is invaluable. The moulding holds a ...
find out more

All Square Wing Rib Building Gauge

All Square Wing Rib Building Gauge

£1.00

This ensures those ribs are perfectly upright & square on the building board. Easy to use ...
find out more

Balsa Sheet 2.4 x 102 x 915mm (3/32 x 4 x 36")

Propellors

Online Catalogue | Accessories |  Propellors

Propeller BalancerPropeller Balancer Ref: SL093-R

Propeller Balancer - This is a must for any serious aeromodeller using 'glow, diesel or petrol motors. Vibration can cause a real problem. Few if any propellers are balanced by the manufacturer. Servos, switches, plugs & sockets, can all be seriously affected, as well as the rest of the airborne gear. Engines too, also suffer with increased wear when subjected to excessive vibration, not to mention possible damage to the airframe itself. Nothing is safe from the destructive force. Any size, and all types of propeller, whether made of wood, plastic or glass reinforced nylon, can be effectively balanced using our Hi-Tec prop balancer. The propeller is held on the spindle by 2 metal cones with internal grommets, which locks onto it. This then lays across the balancing wheels as one. It is extremely sensitive. Material is taken from the tip of the propeller until perfect balance is achieved.
YOU WILL PROBABLY BE AMAZED HOW FAR OUT OF BALANCE YOUR PROPELLER IS.

Click on image to enlarge


Price: £10.50 (Including Vat at 17.5%)     Quantity:  
Folding propeller unit (8 x 4) for standard 500/600 motorsFolding propeller unit (8 x 4) for standard 500/600 motors Ref: SL140-R


Folding Propeller Unit - 203 x 102mm (8" x 4") and designed to give the best all round performance from a standard 540/600 motor. The hub is secured to the motor shaft by a grub screw through the inner hub moulding. The blades are removeable & are available seperately.

Click image to enlarge


Price: £5.05 (Including Vat at 17.5%)     Quantity:  
Spare blades for folding prop. (2)Spare blades for folding prop. (2) Ref: SL141-R


Spare blades for folding prop. See SL140-R.

Click image to enlarge


Price: £1.58 (Including Vat at 17.5%)     Quantity:  
Prop AdaptorProp Adaptor Ref: SL099-R

Prop Adaptor - Made from polished alluminium, the shank is bored to accept the 540/600 motor shaft, which is secured with grub screw. The 6mm (1/4") shank will accept standard propellers. An Allen key is provided. The longer step prop adaptor just has a longer shaft.

Click image to enlarge


Price: £3.93 (Including Vat at 17.5%)     Quantity:  
Prop Adaptor - LongProp Adaptor - Long Ref: SL099-1-R

Prop Adaptor - Made from polished alluminium, the shank is bored to accept the 540/600 motor shaft, which is secured with grub screw. The 6mm (1/4") shank will accept standard propellers. An Allen key is provided. The longer step prop adaptor just has a longer shaft.

Click image to enlarge


Price: £4.56 (Including Vat at 17.5%)     Quantity:  
Finger Guard, black, thick ribbed rubberFinger Guard, black, thick ribbed rubber Ref: SL036-R


Finger Guard - The propeller & spinner section seemed the obvious place to put this item. PROPS CAN BITE! Avoid serious injury with this thick ribbed finger guard. New soft rubber type.

Click on image to enlarge


Price: £1.63 (Including Vat at 17.5%)     Quantity:  

Online Catalogue | Accessories |  Propellors